1300 294 649
Home   |   About Us   |   Resources   |   Order Online   |   Contact Us
POWER ASSISTED LIPOSCULPTING
MicroAire’s PAL® LipoSculptor™ is the only US-patented liposuction instrument using a reciprocating motion (rather than rotating) to facilitate the movement of the cannula within tissue.
 
This innovation reduces the amount of manual force and physical effort required to perform lipoplasty, especially in areas with fibrous tissue.
 
The result is a more comfortable experience for both the surgeon and the patient.
 
Unlike ultrasonic and laser lipoplasty devices, the PAL® LipoSculptor™ does not use heat, so there are no concerns for the accidental burning that can occur with other systems.
 
 
The PAL® System from MicroAire Aesthetics is a patented surgical instrument system used for fat harvesting and body contouring.
 
PAL® has very real benefits over other liposuction products:
  1. It uses no heat or ultrasound energy, so the fat cells are just as healthy and viable as cells harvested using manual liposuction1.
  2. It uses reciprocating motion that is designed to pass easily through tissue, especially fibrous areas, which makes procedures more efficient.
The PAL® System consists of four components:
  • The PAL-650 Handpiece has a thumb-throttle to control the rate of reciprocation. It is engineered for ultra-low vibration, comfort, efficiency and precision control.
  • The NEW 5020 Electric Console provides reliable power to the handpiece, utilizing a touch-screen interface that can be used to set the instrument’s max speed. The console accepts two instruments simultaneously, including any of MicroAire’s small-bone orthopedic power instruments. The low-flow irrigation pump is intended for orthopedic use, not for tumescent infiltration. The 5020 Console also meets new requirements for reduced electrical interference that went into effect in 2013. The 5020 does accept older PAL® handpieces, but a new 5006-PAL Smart Cable is required.
  • The 5006-PAL Smart Cable connects the handpiece to the console and tells the console which type of instrument is connected.
  • All MicroAire Aesthetics Cannulas are offered in a wide variety of sizes and port configurations. All cannulas are made of high-quality, electro-polished stainless steel.


 
 
PAL-650
PAL LipoSculptor Electric Handpiece
 
MicroAire’s PAL® LipoSculptor™ is the only U.S.-patented liposuction instrument using a reciprocating motion (rather than rotating) to facilitate the movement of the cannula within tissue. This innovation reduces the amount of manual force and physical effort required to perform lipoplasty, especially in areas with fibrous tissue. The result is a better experience for both the surgeon and patient, compared to traditional liposuction.
 
Unlike ultrasonic and laser lipoplasty devices, the PAL® LipoSculptor™ does not use heat, so there are no concerns for the accidental burning that can occur with other systems.
  • 2mm reciprocating stroke at 4000 cycles per minute
  • Thumb-controlled speed throttle on handpiece
  • Powered by a stand-alone electric console
  • Special suction pumps are not necessary
  • Autoclavable Instrument and electric cable
  • High-grade stainless steel cannulas manufactured in the U.S.
 
PAL-730
LipoSculptor Wand
  • An ergonomic manual handpiece for sensitive areas such as the neck and back.
  • Compatible with all LipoSculptor™ cannulas.
 
PAL-500
PAL Sterilization Tray
  • Accommodates two handpieces, electric cable and up to ten cannulas
  • Components are autoclavable
1020
Electric Console
  • Maximum-speed control
  • Accepts a single 1006-PAL[E] Electric Cable
  • Available in 110v or 220v
 
PAL LipoSculptor Turbo Cannulas
  • Provides significant increase in aspirant removal rate compared to standard cannulas. S
  • pecial valve in the hub assembly allows ambient air to enter the cannula
 
PAL-700
Lure Lock Adapter
  • Makes Luer Lock cannulas compatible with the PAL® LipoSculptor™
 
 
LipoSculptor Cannulas
 

Small variations in the number of ports, as well as their size and location on the cannula, can have a significant impact on performance and outcome. MicroAire® has developed multiple cannula varieties, based on recommendations from surgeons.
 

Mercedes
The best overall, general-use LipoSculptor™ cannulas. Ranging from non-aggressive sculpting and extraction cannulas, to aggressive port sizes that are well-suited for large volume extraction and fibrous areas.
 
Flared Mercedes
Aggressive, high volume cannulas, ideal for debulking, separation, dissection and pre-tunneling.
 
3mm Flared Mercedes
  • 360° of extraction.
  • Least aggressive of the flared cannulas, providing maximum extraction through a smaller cannula.
  • Good for breaking up fat without suction, prior to sculpting and extraction.
4mm Flared Mercedes
  • 360° of extraction.
  • More aggressive, best used for contouring and sculpting.
  • This is the cannula that received unbiased acclaim from surgeon-speakers during the recent ASPS and ASAPS annual meetings.
5mm Flared Mercedes
  • 360° of extraction.
  • Aggressive cannula providing maximum extraction.
Double Mercedes
  • 360° of extraction.
  • More aggressive.
  • Best overall general-use cannula.
  • Good for fibrous tissue and large-volume extraction.
Offset Double Mercedes
  • 360° of extraction.
  • More aggressive.
  • Good overall general-use cannula.
  • Good for fibrous tissue and large-volume extraction.
Mercedes
  • 360° of extraction.
  • Moderately aggressive, general-use cannula.
  • Good for majority of cases.
 

Tri-Port 
LipoSculptor™ Tri-Port cannulas are designed with all ports on one side of the cannula. Ports can be directed away from the skin to prevent surface irregularities. This also provides better control when shaping and sculpting, yet cannulas are still optimal for large-volume extraction and debulking.
 
Tri-Port II
  • 270° of extraction.
  • High volume.
Mirrored Tri-Port II
  • 270° of extraction.
  • Maximum volume.
Tri-Port III
  • 90° of extraction.
  • Moderate volume.
Helixed Tri-Port III
  • 270° of extraction.
  • Aggressive cannula for high-fibrous areas.
  • Ideal for gynecomastia cases. 
Tri-Port IV
  • 270° of extraction.
  • Ideal for feathering because of minimal volume.
  • Small hole size.
  • Similar to Vaser® high-def cannulas. 
 
 
 
Multi-Hole
  • 360° of extraction.
  • Ideal for fine sculpting and feathering.
  • Excellent for removing emulsified fat after laser or ultrasonic procedures.
  • Well suited for lipoplasty of the abdomen and flanks.
Single-Port
  • 90° of extraction.
  • The least aggressive and most gentle cannulas, available in varying lengths and diameters. Especially good for fine sculpting, and for lipoplasty in sensitive areas such as the neck and back.
Spatula
  • 90° of extraction.
  • The Spatula is a shorter non-aggressive cannula with a blunt tip that makes it safer to use in small regions such as the neck, and in delicate areas such as the back.
 

PAL® LipoSculptor™ Cannulas     To order, call toll free 1300 294 649 
 
For more details download our brochure
Home     About Us     Resources     Order Online     Contact Us
Copyright 2013 Surgical Supplies Australia
Website by Snowball Internet.        Powered by webEFEKTs.